Metal roofing
Metal Roofing in Lewisville, TX
Standing seam and metal shingle systems for homes and outbuildings from Lewisville out toward Argyle and Copper Canyon.
Price a metal roof — (972) 945-6837
Why Denton County Homeowners Look at Metal
Metal comes up in two conversations in Lewisville. The first is service life: a properly installed standing seam system outlasts two or three asphalt roofs, which changes the arithmetic for anyone planning to stay in the house.
The second is hail. Metal does not shed hail damage entirely, but the failure mode is different, and impact-rated panels behave very differently from a bruised asphalt mat.
Roofing Lewisville Texas walks through both honestly, including the part most contractors skip: metal costs substantially more up front, the panel gauge and finish you choose change the number considerably, and it is the wrong choice for some roofs. You get the real comparison before you commit.
What a Metal Roof Install Covers
Two metal bids with very different numbers usually differ on the four things below, so all four go on the scope in writing.
System selection and explanation
Standing seam with concealed fasteners versus exposed-fastener panel versus metal shingle, with the tradeoffs in cost, service life and appearance laid out plainly.
Panel gauge and substrate
Gauge determines how the panel handles impact and oil-canning, and we specify it in writing rather than leaving metal roof on the scope.
Finish and coating specification
The paint system decides how the color holds against Texas UV, and the difference between finish tiers is real and worth understanding before choosing.
Full tear-off and deck preparation
The existing roof comes off, the decking is inspected and repaired, and the substrate is made flat, because metal telegraphs an uneven deck far more than asphalt does.
High-temperature underlayment
Metal roofs run hot, and the underlayment beneath them has to be rated for it or it degrades early and silently.
Clip, fastener and expansion detailing
Metal expands and contracts measurably across a North Texas year, and a system fastened without accounting for movement will oil-can, loosen or tear at the fastener.
Ridge, hip, eave, rake and valley trim
The trim package is where metal roofs leak when they leak, and every piece is specified and itemized rather than bundled.
Penetration flashing built for metal
Boots and curbs designed for metal profiles, correctly integrated with the panel, not adapted from asphalt components.
Ventilation appropriate to the system
Ridge venting and intake balanced for a metal assembly, which behaves differently thermally from a shingle roof.
Written scope and warranty documentation
Panel, gauge, finish, trim, underlayment and labor itemized separately, with the finish warranty and our workmanship warranty stated in writing.
How a Metal Project Runs
01
The assessment and the honest comparison
We inspect the existing roof and the structure, then put a metal scope and an asphalt scope side by side with real numbers so the decision is made on facts. If the roof geometry makes metal impractical or the value is not there, we will tell you.
02
Specification and ordering
You choose the system, gauge, profile and color, and we produce the itemized scope. Metal is ordered to the measurements of your roof, so the lead time is longer than asphalt and the schedule is set around delivery rather than before it.
03
Installation
Tear-off, deck preparation, underlayment, then panel and trim. Metal installs take longer than asphalt and the trim detailing is the slow part, which is exactly where a rushed metal roof goes wrong. We photograph the detailing as it goes in, then sweep the property and hand over the warranty paperwork.
Why Take a Metal Roof to Us
We will talk you out of it when it is not the right call.
Metal is a long-horizon purchase. If you are selling in two years, or the roof has geometry that will drive the trim cost past sense, the numbers will show that and we will say it.
The specification is written, not verbal.
Gauge, profile, finish system and trim are all on the scope. Two metal bids with very different numbers usually differ on exactly those four things, and you cannot see it unless someone writes them down.
The detailing gets the time it needs.
Panels are the easy part. Valleys, transitions, penetrations and expansion allowance are where metal roofs succeed or fail, and our crews are not scheduled to be somewhere else that afternoon.
Get the Metal Numbers, Honestly
Metal is worth serious consideration for a lot of Lewisville homes and is the wrong answer for some of them. Get both scopes, read them side by side, and decide with real figures.